Tag Archives: beginning

Japanese stab binding tutorial: tiara

by

11

jsb-tiara

By popular request, the tiara pattern. Sorry this has taken so long, I’ve had a lot of personal stuff going on and I thought I had lost the pattern instructions and was going to have to recreate them from memory, but I found the paper today, yay! So here it is. A beginning bind, with only one small tricky part in the middle. Click on any photo to enlarge.

hole pattern

jsb.tiara.holes

sewing pattern

jsb.tiara

EXIT = needle pointed DOWN and ENTER = needle pointed UP
=====
enter 1 (leave a tail but don’t knot it), wrap right edge, enter 1 again
exit 2, wrap around spine, exit 2 again
enter 1
exit 3
enter 4
exit 3
enter 5
exit 6
enter 5
exit 7
enter 8
exit 7
enter 9
exit 10
enter 9
exit 2
enter 9
exit 11
enter 4
exit 11, wrap around spine, exit 21
wrap around spine through loop, point left, exit 11
enter 12
exit 6
enter 12
exit 13
enter 8
exit 13
enter 14
exit 15
enter 14
exit 16
enter 10
exit 16
enter 17
exit 18
enter 17
exit 19
enter 20
exit 19
enter 21
exit 23
enter 21
exit 22
enter 28
exit 22
enter 15
exit 22
enter 24
exit 18
enter 24
exit 25
enter 20
exit 25
enter 26
exit 23
enter 26
exit 27, wrap around left edge, exit 27 again
enter 28, wrap around spine, enter 28 again
exit 27
enter 26
exit 25
enter 24
exit 22
enter 21
exit 19
enter 17
exit 16
enter 14
exit 13
enter 12
exit 11
enter 9
exit 7
enter 5
exit 3, tie off

jsb-tiaradetail

japanese stab binding tutorial: hearts

by

3

jsb_21This is a beginning bind, with an intermediate level of holes (40). If you don’t want the gaps between the hearts, then repeat the steps marked in orange until you have the desired number. When you have reached the end of your line of hearts, wrap the left edge, then work your way back to the beginning through the middle of the hearts repeating the steps in blue. Be aware though, you will have to adjust the hole pattern. If you get completely lost, leave a comment with your question and I will try to answer it.

**click on an image to enlarge**

hole pattern
jsb.hearts.holes

sewing pattern
jsb.hearts

EXIT = needle pointed DOWN and ENTER = needle pointed UP
=====
enter 1 (leave a tail but don’t knot it), wrap around right edge,
enter 1 again
exit 2
enter 3
exit 4
enter 5
exit 6
enter 7
exit 6
enter 5
exit 4
enter 3
exit 2
enter 1, wrap around spine at angle to below 9,
enter 1 again
exit 8
enter 9
exit 10
enter 7, wrap around spine, thread needle through loop from 1, point right,
enter 7 again
exit 11
enter 12
exit 13
enter 14
exit 15
enter 16
exit 17
enter 16
exit 15
enter 14
exit 13
enter 12
exit 11, wrap around spine at angle to below 19,
exit 11 again
enter 18
exit 19
enter 20
exit 17, wrap around spine, thread needle through loop from 11, point right,
exit 17
enter 21
exit 22
enter 23
exit 24
enter 25
exit 26
enter 27
exit 26
enter 25
exit 24
enter 23
exit 22
enter 21, wrap around spine at angle to below 29,
enter 21 again
exit 28
enter 29
exit 30
enter 27, wrap around spice, thread needle through loop from 21, point right,
enter 27 again
exit 31
enter 32
exit 33
enter 34
exit 35
enter 36
exit 37
enter 36
exit 35
enter 34
exit 33
enter 32
exit 31, wrap around spine at angle to below 39,
exit 31 again
enter 38
exit 39
enter 40
exit 37, wrap around spine, thread needle through loop from 31, point right,
exit 37 again
wrap around left edge, exit 37 again
enter 40
exit 39
enter 38
exit 31
enter 27
exit 30
enter 29
exit 28
enter 21
exit 17
enter 20
exit 19
enter 18
exit 11
enter 7
exit 10
enter 9
exit 8, tie off